two apple ciders with green tea and plum

How Alcoholic Apple Cider is Made

As a people, we seem to have managed to make alcoholic drinks from all sorts of produce. Grains are transformed into beer, or spirits (e.g. whiskey). Grapes are transformed into wine, pears into perry, and apples, into cider. Making an alcoholic drink was a great way to preserve produce (and have something safer to drink than contaminated water), by now, we mostly drink them for enjoyment.

All these processes are quite similar. They start with a way to free up the sugars (aka the food for the yeast). Next, the yeasts are ‘released’ to do their job and ‘eat’ those sugars, converting them into alcohol. We’ve discussed beer-making quite extensively before, but hadn’t delved into the more fruity drinks. Since we had an ample supply of apple juice at hand, we focused these experiments on this delicious fruit. Hence it’s time to dig into the science of apple cider!

What is (hard) apple cider?

Before diving in, let’s get some terminology sorted. As is so often the case for foods and drinks, naming conventions for apple cider differ around the world. Overall, there are two types of drinks that we’ll be discussing here:

  1. The juice made from an apple. This contains the sugars from the apple, it might be pasteurized or filtered, but has not otherwise been transformed. Here, we’ll refer to this as apple juice, however, some of you might refer to this drink as apple cider!
  2. Fermented juice from an apple, contains alcohol. When you let cider yeasts grow and thrive in the juice from the apple they’ll form alcohol (ethanol). Here in this post we’ll be referring to it as apple cider. Some of you though might refer to this as hard cider.
apples in bowl

It starts with apples

To make apple cider: all you truly need are apples and yeast (which might already be on your apples). Don’t underestimate the importance of apples. Since the whole drink will rely on what’s in those apples, choosing a suitable apple is important (the same is true by the way when making apple pie).

When looking for cider apples, cider makers will consider the following factors:

Sweetness (aka sugar content)

For apple juice to be converted into apple cider, yeasts need to convert sugar into alcohol (and flavors). The sugar in your apples will all be converted into alcohol during fermentation. If the sugar content of your apples is very high, you might end up with too much alcohol in your cider.

Cider makers will measure the sugar content of the apple juice by measuring the specific gravity of the juice. Beer brewers use a similar method. An apple juice with a specific gravity of 1.040 is considered to be low on the sugar content scale, one with a specific gravity of 1.075 is very high.

The specific gravity of a liquid compares the density of that liquid to another liquid. It can also be called relative density. In our case the reference is water. Since apple juice contains sugar, the density of the juice is higher than that of water.

Read more here

Acidity

For a well-balanced drink you don’t just want to taste the alcohol. The acidity of an apple adds some ‘zing’, some sourness and freshness to the drink. Too much acid though will make for an unappetizing drink.

The main acid in apples is malic acid. As such, the acidity of apples is often expressed as total acid (TA) content. The main acid at play here is malic acid. As such, 1% acidity refers to 10g of malic acid per liter of apple juice.

Some references might refer to % of tartaric acid. This is also an acid, however, is more commonly used in wine making. These two numbers can be converted into one another.

Apple juices suitable for cider making tend to have an acidity in between 4,5-7,5%. The acidity of apple juices can vary more widely though, between as low as 1g/l or as high as 15g/l.

Tannins

Tannins are a group of molecules that taste bitter and astringent. They provide some depth and interest to a drink. They are also what gives red wine their ‘body’.

Tannin can be determined using a simple chemical analysis. A low tanning apple will contain <1g/l, high tannin content apples contain around 4 g/l.

Cider apples

There are apple varieties that are specifically grown for making into cider. These so-called cider apples tend to be more tart and bitter because of their higher levels of tannins than regular apples. Therefore, these apples don’t tend to taste good when eaten fresh. When you transform them into a cider though, you might be looking for some of those flavors to come through.

Apart from using just one apple variety, cider makers may also use blends of apples. Choosing a specific blend can give just those properties they are looking for that you can’t find in a single variety.

apple juice
We didn’t have a grinder or press, so went ahead and used apple juice for making apple cider as part of our experiments. This apple juice specifically was made from Jonagold apples that would have otherwise been thrown out. They’re not the best for making into a cider, but still work!

Making apple juice

Once you’ve chosen your apple, the first step of making it into a cider is to transform it into a juice. You only need the juice of the apple, not the seeds, skins, etc. Extracting that juice starts by grinding the apples. While grinding you break down cell walls. These cells held onto the water, so once they’re broken the juice flows out.

After grinding, the apples are pressed to break even more cells and free up even more juices. The resulting juice won’t be clear. Instead, it will be hazy with particles floating around. In some cases, cider makers will clarify the juice at this point but most do it at a later stage, or not at all.

If you’ve ever eaten an apple you will know that if you take a bite out of the apple, and leave it out for only a little while, it will turn brown. This is caused by enzymes that initiate enzymatic browning reactions. Apart from turning brown, apple juice is also very vulnerable to spoilage by microorganisms because of the high sugar content. Therefore, manufacturers will either use the juice directly or treat it to stabilize it.

What about the rest of the apple?

Apart from the juice, you’re left with apple remainders such as peel and seeds. These are called pomace. This is full of pectin and can be used for various other applications. However, it’s not required for making apple cider.

Did you know that the pectin in apples is very helpful in setting a thick jam? It’s why jam recipes may call for apples, the pectin helps create a creamier texture.

cider fermentation tanks
The cider fermentation stainless steel tanks as used by Eris cider house.

Fermentation of the apple juice

In order to convert the apple juice into cider, the apple juice has to ferment. During fermentation the sugars in the apple are converted into alcohol and carbon dioxide (and a range of flavor molecules). Fermentation is essential for any alcoholic drink, whisky, beer, etc all start out with fermentation.

Starting with a clean slate

In order for fermentation to occur the right types of yeast need to be present. Apples contain several microorganisms, including yeasts naturally. In some cases cider makers let these naturally present microorganisms do their work at this point.

However, in a lot of cases, these may not be the right type and not give the desired flavors. Therefore, cider makers may first want to make sure that no undesirable microorganisms are present (including ones that can make you sick, pathogenic ones).

There are various ways to do this, the juice can be filtered (to take out some of that sediment which tends to contain more microorganisms) or pasteurized but the most common method is to add some sulfur dioxide (SO2). Sulfur dioxide kills all microorganisms in the juice, allowing a cider maker to start with a clean slate. However, you will have to wait several hours before adding in your specific yeast to prevent it from being deactivated by the sulfur dioxide as well!

Initiating fermentation

At this point, you are either ready for the natural yeasts to do their work or you can add your chosen yeasts to the apple juice. Choosing the right type of yeast can be pretty complex. The yeast needs to thrive in apple juice for one thing and needs to make the right flavor molecules that a cider maker is looking for. The type of yeast used will definitely impact the final result of your cider. There are various yeasts out there that have been developed specifically for making apple cider. Once fermentation starts the yeast converts the sugars in the juice into alcohol, making flavor molecules along the way.

Apart from the yeast, the temperature will have a great impact on the fermentation process. Higher temperatures result in faster fermentation for instance but will give different flavors than a slower fermentation. Generally, temperatures between 15-22°C are used.

The fermentation process will last several days to weeks. By the end of it, you have an alcoholic apple cider. If left to complete fermentation entirely, the apple cider will be flat, it won’t have bubbles upon opening.

The yeast that’s left after the first fermentation series.

Second fermentation

After a while, the yeast starts to slow down since there is less food (sugar) available. The cider may be transferred to a new tank for the next fermentation round. During this step, not a lot of new alcohol will be formed but the flavor of the cider will continue to change. It isn’t uncommon for cider to be aged for several weeks in a tank.

Barrel aging

As we mentioned earlier, a good amount of tannins is important for an apple cider to have a well-rounded flavor profile. A way to add more of those interesting flavors is by aging the apple cider in wooden barrels. Most cider makers will use oak barrels that have already been used for other drinks such as wine or whisky. These barrels contain a lot of flavor molecules from both the wood as well as the drink that was in there before so will really impact the flavor of your cider.

Adding flavors

You can also use this second fermentation or aging step to add additional flavors. One option is to add hops, which are generally added to beer. Hops have a strong and complex flavor which will enrich the apple cider after a few days of soaking. Also, hop can help preserve a cider.

Another option is to add spices such as vanilla or cinnamon to the cider at this point. These flavors will slowly infuse into the cider.

You will also find ciders to which additional fruits (e.g. blueberries) have been added again at this point. Adding fruits though will result in more active fermentation again. Fruits contain new sugars so can revive the yeasts again! If a cider maker does not want this to happen, they can force the fermentation to stop first by adding chemicals that stop the yeast. They might do this for instance when adding back some apple juice if you want to sweeten up the cider slightly but not get more alcohol again.

Adding fizz

If you want your cider to be carbonated, you’ll need new gas to form within the bottle. This is done by adding back a little bit of sugar into the apple cider upon bottling. The yeast will again start to ferment and produce carbon dioxide. Now, since the bottles are closed, the gas can’t escape and will remain within the liquid. If too much sugar is added though the bottle might explode because of too much gas build up.

Commerical cider makers might not ferment again in the bottle. Instead, they’ll have carbonation systems (such as used for making soda) with which they can carbonate the apple cider upon bottling.

Clarification

Remember that the initial apple juice is often hazy to start with? Most apple ciders though are clear and have no particles floating around. That is because they are clarified after the fermentation process. Some of the particles have settled down to the bottom of the tank (sedimentation), so those are easy to remove. Especially after quite long fermentation times, a lot of the particles will have settled out already. In other cases, a centrifuge can be used to separate these particles or you can add ingredients that will gather these particles

See & Test the process

Angry Orchard, a brand of alcoholic cider has a nice video on their website showing all the most essential steps, starting with the apples, ending with a cider (scroll down below the recipe). If you learn best by doing so, give making your own apple cider a try!

bottles with apple cider

Apple Cider

Yield: As much as you want!
Prep Time: 30 minutes
Additional Time: 28 days
Total Time: 28 days 30 minutes

Learn best by doing? Have a go at making your own apple cider. This is a beginner's recipe, using store-bought apple juice. These apples might not be the best for your cider, but it's a good and easy way to start. You can amp up your cider game once you've got the hang of it!

This is a 'plain' cider, once you've got a good process going, feel free to add fruits, flavors, etc.!

Ingredients

  • pasteurized apple juice*
  • cider yeast (e.g. Mangrove Jack's M02 yeast, 2,5g/5 liter)
  • cleaning agent (e.g. Puro Oxi)

Instructions

It's best to buy a cider yeast online to ensure you've got the right type. We used Mangrove Jack's M02 yeast. Since every yeast is slightly different, follow the appropriate instructions for your yeast which might be a little different than what we did below.

As we mentioned above, it's very important for the right type of microorganisms to be in your apple juice. That is why you'll probably spend most of your time cleaning tools and equipment. The actual cider making is quite simple :-). Don't skip this cleaning, it will ensure your cider will actually with worthwhile to drink!

Cleaning

Start by cleaning all your equipment with your chosen sanitizer (we used Puro Oxi). Also, make sure to wash small tools such as spoons and your own hands (if the sanitizer is suitable for your hands). Tools we'd recommend to have at hand:

  1. Bucket with a hole in the lid to fit an airlock (remember to clean the lid)
  2. Airlock
  3. Small cup to pre-soak yeast
  4. Specific gravity measuring device
  5. Few spoons
  6. Little cup to weigh out yeast tools for making apple cider

Brewing

  1. Measure the specific gravity of your apple juice and check whether it's within your desired range (1.04-1.05 is great, a little higher is fine as well).
  2. Fill a little cup with some apple juice.
  3. Weigh the required amount of yeast (follow instructions on the packet). Sprinkle the yeast on top of your little cup of apple juice. This is to check whether the yeast is active. Also, it is a way for the yeast to get used to the environment. Do not mix the yeast through or pour the juice on top of the yeast. The yeast might be shocked by the sheer amount of sugar present and die as a result. You should see bubbles floating to the top slowly.
  4. Pour the juice in your bucket (or container) (we made 5 liters at a time).
  5. Gently pour the cup with apple juice and yeast on top of the rest.
  6. Close the bucket and put an airlock on top. Fill the airlock with sanitized water. This lock will let gas (which forms during fermentation!) pass through, while insects and other contaminants won't be able to enter the apple juice. A lot of gas will be formed during fermentation so it needs a way to escape safely!
  7. Leave to sit at room temperature. You should start to hear the airlock 'plop' within a couple of hours. The frequency will go up the first few days, hearing regular 'plops' coming from the bucket. After a few days it will slowly die down again until it's completely finished after 3-4 weeks.
  8. Ferment the juice until you no longer hear it plopping. This means that all available sugar has been fermented and transformed into alcohol.

Bottling

  1. Determine if you want to make a still or sparkling cider. If still, skip the next step.
  2. For a sparkling cider (one that contains some carbon dioxide and will fizz up) you will need to give the yeast some new food. The new food will get the yeast going again, producing new gases that will now be trapped within the final bottle. Take care not too add too much food (aka sugar) or the bottle will explode because of the pressure build up. As a guideline, use 1 tsp (3g) of sugar per liter of fermented apple juice. Add the sugar to your bottles before bottling (if making small quantities).
  3. Using a lever, transfer the juice into the bottles, aiming to fill them all to the same level. At the bottom of the bucket, you'll find a layer of yeast. Do not transfer this into your bottles, leave it in the bucket.
  4. Close the bottle and leave to sit for at least a month, or up to a year to further develop in flavor and for the carbonation to develop.bottles with apple cider

Notes

*By using pasteurized apple juice you're sure that you don't have any microorganisms in your juice that could mess up fermentation! Choose an apple juice that's not been processed too much and doesn't just taste sweet.

Further reading

American Home Brewer’s association, The balancing act: how to make hoppy cider, Milly Shamburger, link

D. Arthey , Fruit processing, 2012, Springer science & business media, link

Cider, Methods for Cider ‘Tannin’ Analysis, link

Cidersage, How to make hard cider, link

Cider school, Cider apples, link

GEA, Cider – An apple (drink) a day…, Nov-15, 2017, link

Home cider making, Back Sweetening Hard Cider for Bottling & Kegging, Nov-26, 2017, link

Claude Jolicoeur, Acidity and pH of apple juice, link

Jolicoeur, C., The new cider maker’s handbook, 2013, link

Maria Kosseva, VK Joshi, PS Panesar, Science and technology of fruit wine production, chapter 3 & 4, link

Lallemand, Technical overview on cider production, Apr-25, 2017, link

Jessica Shabatura, Making your cider, from: How to make hard cider, link

Ben Watson, Cider, Hard and sweet: history, tradition and making your own, 3rd edition, Chapter 3 & 4, link

What's your challenge?

Struggling with your food product or production process? Not sure where to start and what to do? Or are you struggling to find and maintain the right expertise and knowledge in your food business?

That's where I might be able to help. Fill out a quick form to request a 30 minute discovery call so we can discuss your challenges. By the end, you'll know if, and how I might be able to help.

headshot Annelie

6 Comments

    • Hi Michael,

      Generally you want quite bitter apples for making apple cider. However, if you don’t have access to ‘ideal’ apples for cider making, I would just try it with the apples you have at hand. Make a small batch first and see whether they come out to how you like your cider. Everyone likes their cider slightly different, so maybe this type of apple might just work best for you. I have very limited personal experience trying different apples, but Blake’s hard cider gives some more details as to some of the apple varieties that work well here.

  1. Ooo this was a perfect reading to get me into cider making. The most important question that I have is, how long should we wait before we can taste the outstanding product that we have made. One year to develop the taste I understand, but …

    • Hi Mihail,

      If you can’t wait you can try it once the fermentation process is over. If you’re bottling without extra sugar that’s immediately after bottling, but if you add a little extra sugar to your bottles I would wait at least a month, just to be sure it’s completely done. You could make it an experiment, taste every month, write down your notes and decide when it’s best for you. Maybe you happen to like fresh young ciders better than older aged ones!

  2. Great blog post, Very clear steps for making Apple Cider! Really interesting to know about the process for making amazing Apple Cider. thanks for sharing!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Skip to Recipe